2-Barrel Brewery For Sale
Complete 2-Barrel Turnkey Brewery System
Portland, Oregon

Email: teri @ fahrendorf. com

Information about this 2-barrel brewery system:

Below is the history of, and equipment list for, this 2-barrel brewery equipment.


The brewery equipment was purchased new in 2010 from Allied Beverage Tanks (ABT). It is a shrunk down professional brewery. It is not a sized up homebrewery.

The original owners operated the brewery in eastern Washington state for 3 years. They expanded first by buying 7 barrel fermenters and brewing 3 times into them. Then they sized up beyond that and sold the brewery system to me. I bought it in 2013, to have for my retirement business. I leased it for several years under the name "Lease A Nano," to several start-up breweries. It is now for sale as I no longer want a retirement business.

Currently the system is well packed into two 1-800-Pack-Rat cubes and is in storage in the Portland, Oregon-area Pack Rat warehouse. The two cubes are 8x16 units. Everything is padded and well secured, and are ready to ship to your location.


Price is $60,000 firm, FOB Fairview, Oregon (the Pack Rat warehouse)


o Qty: 1- 3 ring binder with electrical specs and diagrams
o Mash/Lauter Tun- WP/HLT Combo Tank (ML/WP/HLT 42-2BBL-MAR18-10)
- 3 step brew deck
- Spent Grain Slide
o Brew Kettle (B/K 463-2BBL-MAR-18-10)
- Heating element and control panel
o Qty: 4 - Fermentation Tanks (FV464, FV465, FV466, FV467-2BBL-MAR-18-10)
o Qty: 8 - Stainless Steel Serving Tanks (SSST468, SSST469, SSST470, SSST471, SSST472, SSST473, SSST474, SSST475-2BBL-MAR-18-10)
- all Serving Tanks are on Wheels
o Qty: 1- Nanhua Heat Exchanger
o Qty:1- Jimboney 3-roller Mill w/ cabinet (purchased new 2015)
o Qty 4 Brewery hoses- qty:2- 6 ft, qty:2 - 8 ft
o Qty:1- Grant ( fabbed from 1/2bbl keg)
o Qty:1- Thomsen portable pump on cart with VFD
o Qty:1- CPE C-100 3/4 HP 316L Pump on stainless cart with VFD
o Qty: 2- Glycol Chiller units
- Qty: 4 Ranco temp controllers w/ individual lighted power switch (purchased new 2015)
- Qty: 4- SS Ball valve (manual)
- Qty: 4- Check Valves
o Qty: 1- 3/4in Butterfly valve
o Qty: 32- 1.5in Butterfly valves
- Qty: 3- with SS Handle
- Qty: 29-with blue plastic handle
o Qty: 2- 1.5in x 12in Spool
o Qty: 24- 2.0in Tri-clover clamps
o Qty: 71- 1.5in Tri-clover clamps
o Qty: 8- Racking Arms for Serving Tanks
o Qty: 12- Pressure Relief Valves
o Qty: 12- Sample Valves
o Qty: 2- Carbonation Stones
o Qty: 4- 2.0in Flat Tri-clover Cap
o Qty: 13 1.5in Flat Tri-clover Cap
o Qty: 15- 1.5in Tri-clover elbows
o Qty: 12- Special Tee ( 2inTC- 1.5in TC- 2in TC)
o Qty: 9- Special Spool (2in TC with pressure gauge and small ballvalve)
o Qty: 2- Special spool (2in TC with Ball Valve welded on at tee)
o Qty: 9- Thermowells
- qty:4- 6.75in long
- qty:1- 21.5in long
- qty:2- 9in long
- qty:2- 5.25in long
o Qty: 13- CIP Sprayball assembly (complete)
- qty: 12- long
- qty:1- short
o Qty: 1- Big Sprayball head with retaining clip
o Qty: 12- 12in to 2in cap (these are for the top of the 4 fermenters and 8 serving tanks)
o Qty: 12- 12in Buna Tri-clover gasket (these are for the top of the 4 fermenters and 8 serving tanks)
o Qty: 1- Picobrew system for pilot brews, plus 4 Picobrew Cornelius cans

Click here for Mutual Nondisclosure Form.
Click here for Equipment List.
Click here for Tank Drawings.
Best photos available at Photos
Click here for More Photos.


This is a very complete brewery. You will need to supply the electrical supply, glycol, glycol hoses, cold box for bright tanks, floor drains, and of course your licensing, etc. I can't really think of anything else you would need.

Approximate Empty Weights:

Kettle: 400 lbs
CombiTank (MLT/WP/HLT): 550 lbs
Fermenters: 350 lbs each
350 lbs each
Misc Small Parts: 600 lbs

Minimum estimated size of brewery space: 600 square feet
Estimated size of smallest cooler needed: 12 x 14 foot.

Electrical Needs: 240 Volt/ 3 Phase/ 10000 Watts.

Approximate Efficiency: 75%. Bigger beers are less efficient.

Contact: teri @ fahrendorf . com

Phone: 5 0 3 -- 4 9 6 -- 9 7 4 5